To Next PageTo Next Page
Need help?Do you have a question about the SCHOTTEL SRP Series and is the answer not in the manual?
General| Brand | SCHOTTEL |
|---|---|
| Model | SRP Series |
| Category | Marine Equipment |
| Language | English |
Description of the SCHOTTEL rudder propeller as a Z-drive unit for propulsion and steering.
Details on power transmission, steering, and materials used in the SRP's design.
Explanation of the oil bath lubrication, oil tank, circulation, and level checking.
Purpose and application of compensating fins in steering systems for torque absorption.
Description of the worm gears used for steering, driven by hydraulic motors.
Measures for operating a new or repaired SRP, including oil filling and initial checks.
Routine checks before starting the SRP, covering vent cocks and oil levels.
Checks to be performed during operation, focusing on oil condition and steering effort.
Instructions for safely disengaging the drive shaft when swinging the SRP.
Overview of maintenance intervals and tasks for new and existing SRP units.
Procedure for draining and refilling the oil in the SRP gear-box.
Procedure for changing the oil in the attached steering gearing systems.
Inspection of the lower gearing for oil leaks, propeller damage, and mounting screw security.
Measures for taking an SRP out of service for up to 6 months to prevent corrosion.
Steps for adjusting the compensating fin to ensure balanced steering.
Procedure for cleaning the air filter on the separate oil tank.
How to adjust the rudder position indicator to match the SRP's actual orientation.
Reference to specific operating instructions for the Schottel Navigator installation.
Step-by-step guide for installing the SRP into a vessel's well foundation.
Instructions for fitting propellers, including torque values and securing methods.
