Preparation before performance
Power
1. 1.First make sure whether the power switch of electric grand piano is at OFF position. If not, poke
the switch to OFF position.
2. Connect the power cord; insert one end of power cord, In AC jack of the electric grand piano and
the other end in power socket.
Keyboard lid
Open keyboard lid
Hold up the keyboard l id of the piano gently and push it inside, it will slide inside as well, the lid will
be opened.
Close keyboard lid
Slide the keyboard l id of the piano towards the direction of your body and put down the lid over the
keyboard.
Music stand
Raise music stand
Pull the music stand up untill it was upright. Now the spring bounces outside. put the spring bracket
on the top wooden cover of the piano, the music stand will stand on the top wooden cover of the
piano in a slant way.
Put down the music stand
1. Pull the music stand up untill it was upright.
2. Fold the spring bracket inside, Notice: you need to lay EPE slice as to avoid the bruise.
3. Put down the music stand gently untill it layed on the top wooden cover of the piano.
Turn on power switch
Press [POWER ] button to turn on the piano.
Volume Adjustment
You can setup the high or low volume by rotating the volume rotary button .The volume
rotary button can control the keyboard volume and accompaniment volume at the same
time.
To Next Page
Loading...
