20
Tip:
Both chin straps are adjustable in length.
Caution:
When adjusting the strap, make sure that the helmet cannot be pulled o
in a forward direction with the chinstrap closed.
Caution:
Check the adjustment of the chinstrap length at regular intervals.
OPENING AND CLOSING
To close the chinstrap fastener, slide the ratchet tongue step by step into the
locking buckle. If you nd that the chinstrap ts too loosely around your chin,
slide the ratchet tongue one step further into the locking buckle. When adjusting
the chinstrap, make sure that it rests rmly but not uncomfortably around your
chin. To open the chinstrap, pull the red ribbon on the ratchet fastener upwards
to release the locking buckle (1). Then pull the ratchet tongue out of the locking
buckle (2).
Caution:
Never ride without making sure that the chinstrap is correctly and snugly
fastened and adjusted and properly positioned. If the chinstrap is not
correctly adjusted and snugly fastened, the helmet could be displaced in
the event of an accident resulting in serious injury or death.
Caution:
Never open or adjust the chinstrap while riding.
C. THE HELMET
(1)
(2)
To Next Page
Loading...
Need help?
General
