SCHUBERTH C5 User Manual

38
1. PUTTING ON THE HELMET AND CHECKING THE FIT
1. Open and lock the chin bar. Make sure the sun visor is retracted into the
helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Fasten the chinstrap and the chinstrap comfort pad.
6. Make sure the chinstrap passes under the chin and ts snugly.
7. Swing the chin bar down until you hear both locks close.
8. Check that the chin bar is securely locked by pressing it up from below
2. TAKING OFF THE HELMET
1. Open and lock the chin bar. Make sure the sun visor is retracted into the
helmet shell.
2. Open the chinstrap.
3. Grasp the ends of the chinstrap and pull the chinstrap ends apart.
4. The helmet can now be removed easily from the head..
5. Close the chin bar.
Tip:
To avoid scratching any objects you might place the helmet on, we
recommend closing the chin-strap after you have taken the helmet o.
D. PUTTING THE HELMET ON AND
TAKING IT OFF

SCHUBERTH C5 Specifications

General

Helmet Type	Modular
Shell Material	Fiberglass composite
Safety Standard	ECE 22.06
Interior	Removable and washable comfort liner
Sun Visor	Integrated, adjustable
Communication System Ready	Yes
Visor	Anti-fog and scratch-resistant
Sizes	XS to 3XL
Chin Vent	Adjustable
Bluetooth Compatibility	Yes
Weight	Approx. 1640g
Safety Standards	ECE 22.06