32
2. Loosen all 4 pins of the upper
head pad as well as the 2 pins of
of the left and right side pads.
3. For the side pads, also loosen the
the velcro connection to the cheek
pads.
4. Loosen the 2 pins of the back pad.
Attention, here you must additionally
loosen the back pin of the cheek pad.
INSTALLATION INNER LINING
INSTALLATION HEAD PAD
1. Connect the 4 pins of the head pad with
the corresponding plug-in devices.
2. Connect the 2 pins of the side pad with
the corresponding plug-in devices. Please
note the marking of the right and left
side pad.
C. THE HELMET
To Next Page
Loading...
