To Next PageTo Next Page
Need help?Do you have a question about the Schumacher Electric SC1304 and is the answer not in the manual?
General| Input Voltage | 120VAC |
|---|---|
| Output Voltage | 12V DC |
| Cranking Amps | 100A |
| Cable Length | 6 feet |
| Display Type | LED |
| Weight | 3.5 lbs |
| Dimensions | 8 x 5 x 3 inches |
| Battery Type | AGM, Gel |
| Type | Battery Charger |
Provides essential safety rules for operating the battery charger and handling batteries.
Highlights the danger of explosive gases generated by lead-acid batteries and the need for caution.
Details precautions for working near batteries, including eye protection, clothing, and removing metal items.
Specifies compatible battery types, advises against charging frozen batteries, and warns of California chemical hazards.
Instructions for safely removing the battery, handling acid, and adding distilled water.
Emphasizes following manufacturer's specific precautions and setting correct voltage and charge rate.
Guidelines for positioning the charger away from the battery and ensuring adequate ventilation.
Precautions to prevent battery gases or acid from damaging the charger.
Safe practices for connecting and disconnecting DC output clips to the battery and chassis.
Critical warnings about sparks, moving parts, and staying clear of hazards during charging.
How to identify positive/negative posts and determine chassis grounding for proper connection.
Step-by-step instructions for connecting the red and black clips to the vehicle's battery and chassis.
Procedure for safely disconnecting the charger from the vehicle and power outlet.
Safety precautions for connecting the charger to a battery located outside the vehicle.
Instructions for making the final connection and safely disconnecting the charger after use.
Specific advice for charging marine batteries, recommending shore charging.
Ensures proper grounding and warns against altering the AC cord or plug.
Recommendations and specifications for using an extension cord safely and effectively.
Instructions to remove cord wraps and uncoil cables before use.
Description of the meaning of the different LED indicator lights on the control panel.
Explanation of what the digital display shows during different charging modes and operations.
Notes on how the display enters sleep mode and how to reactivate it.
Details on what the digital display shows regarding battery charge percentage and voltage.
Instructions on how to use the charging rate button for 3A or 15A settings.
Guide on using the button to select battery types like STD, AGM, or GEL.
Step-by-step procedure for charging a battery while it is installed in the vehicle.
Step-by-step procedure for charging a battery when it is removed from the vehicle.
Explains the automatic transition to maintain mode after charging is complete.
Details on aborted charges, desulfation mode, and troubleshooting steps.
Indicates when charging is complete and the charger enters maintain mode.
Guides on reading the digital display and comparing voltage to determine battery condition.
Details the charger's behavior if no button is pressed after power-up.
Explains how to switch between charger and tester modes after charging.
Steps for cleaning clamps and charger case to ensure longevity and prevent corrosion.
Proper methods for storing the charger, including cord management and placement.
Lists specific error codes, their descriptions, and recommended solutions for troubleshooting.
Addresses common problems like non-sparking clamps, LEDs turning off, and inability to select voltage.
Provides contact details for customer service and instructions for repair or return procedures.
