To Next PageTo Next PageHow to fix the 'CHARGE ABORTED- BAD BATTERY' error on Schumacher Electric SP1297 Battery Charger?
If the green LED is flashing and the display on your Schumacher Electric Battery Charger shows 'CHARGE ABORTED- BAD BATTERY', it could mean the battery is sulfated. Try resetting the charger by unplugging it briefly. Alternatively, the battery might be too large for the charger, in which case you'll need a charger with a higher amp rate.
What to do if my Schumacher Electric SP1297 display shows 'CONNECT CLAMPS'?
If your Schumacher Electric Battery Charger displays 'CONNECT CLAMPS', it means the clamps aren't making a solid connection. Double-check the connections at both the battery and the frame. Also, the in-line fuse for the ring connector may be bad, so replace it.
Why my Schumacher Electric SP1297 Battery Charger will not turn on?
If your Schumacher Electric Battery Charger won't turn on even when properly connected, there could be a couple of reasons. First, the AC outlet might be dead; check the fuse or circuit breaker. Second, there might be a poor electrical connection. Make sure the power cord and any extension cords are snugly plugged in.
General| Brand | Schumacher Electric |
|---|---|
| Model | SP1297 |
| Type | Battery Charger |
| Input Voltage | 120V AC |
| Voltage | 12V |
| Battery Type | AGM, Standard, Gel |
| Features | Reverse Hook-Up Protection |
| Output Voltage | 12V DC |
| Cable Length | 6 feet |
| Warranty | 2-year limited warranty |
Covers essential safety guidelines for operating the battery charger, including handling, usage, and maintenance.
Highlights the dangers of explosive gases from lead-acid batteries and the importance of following instructions.
Provides safety measures for working near batteries, including eye protection, avoiding sparks, and removing metal items.
Outlines essential safety steps for connecting and disconnecting the charger's DC output clips.
Covers spark warnings, cord management, and checking battery polarity and grounding for safe connection.
Details connection procedures for negative-grounded and positive-grounded vehicles, including chassis connection points.
Explains how to safely connect and disconnect the charger to a battery removed from the vehicle.
Step-by-step guide for charging a battery while it is installed in the vehicle.
Step-by-step guide for charging a battery that has been removed from the vehicle.
Instructions for connecting the battery clamp quick-connect to the battery.
Contact information and procedures for returning the unit for repair or replacement.
