To Next PageTo Next PageWhy is the charged LED flashing on my Schumacher CR2?
The CHARGED LED flashes when the battery reaches 80% charge, indicating it's 'ready to use'. Consult the section on Quick Charge in the operating instructions for more details.
How to fix a Schumacher CR2 when the power light will not turn on?
If the power light doesn't turn on, it could be due to a dead AC outlet or a poor electrical connection. Check the AC outlet for an open fuse or circuit breaker. Also, inspect the power cord and any extension cords for loose plugs.
General| Brand | Schumacher |
|---|---|
| Model | CR2 |
| Category | Battery Charger |
| Language | English |
User must read manual to reduce risk of injury from shock or fire.
Do not alter connectors if they don't fit; modifications risk shock or fire.
Do not use a damaged cord or plug; seek qualified service for repairs.
Do not disassemble the charger; repairs must be done by qualified personnel.
Follow battery manufacturer instructions to reduce risk of battery explosion.
Remove metal items near batteries; lead-acid batteries produce explosive gases.
Never smoke or allow sparks near batteries due to risk of explosion.
Use charger only for 16/24V lead-acid batteries; do not use with dry-cell types.
Never charge a battery that is frozen to prevent damage or injury.
Use a properly installed, grounded 120V outlet; adapter plugs not recommended/allowed.
Use extension cords only if necessary, ensuring proper fit, condition, and wire size.
Check outlet for power or circuit breaker; check cord connection.
