The Schumacher SL197U is a magnetic mount work light designed for various applications, providing illumination and convenience through its portable and versatile design. This owner's manual outlines important safety instructions, setup procedures, features, charging guidelines, operating instructions, maintenance, storage, troubleshooting, and specifications.
Function Description
The SL197U is a portable work light equipped with a magnetic mount, allowing it to be easily attached to ferrous metal surfaces. It provides illumination for various tasks and is powered by a rechargeable lithium-ion battery. The light offers two power settings (high and low) to suit different lighting needs and optimize battery life. Its primary function is to provide hands-free lighting in workshops, garages, or other environments where portable and adjustable illumination is required.
Important Technical Specifications
- Battery Type: Lithium Ion, 3.7V, 2200 mAh
- Light Source: 15 SMD LEDs
- Lumen Output:
- Operating Time:
- High: 6 hours
- Low: 12 hours
- Charging Time: 3 hours
- Charging Cable: USB to Micro USB charging cable (Part Number: 3899003752Z)
Usage Features
- Magnetic Mounting: The work light features sliding magnetic brackets that allow it to be attached to any ferrous metal surface. These brackets can be slid and swiveled to adjust the light to the desired position, providing flexible illumination.
- Dual Power Settings: The ON/OFF button allows users to cycle through two power settings: high power for maximum brightness and lower power for extended battery life. A third press of the button turns the unit off.
- Rechargeable Battery: The device is powered by an internal lithium-ion battery, which is rechargeable via a micro USB port.
- Charging Status Indicator: A charging status LED indicator (red for charging, green for fully charged) provides visual feedback on the battery's charging status.
- Portability: Its compact design and internal battery make it highly portable, suitable for use in various locations without needing a constant power source.
Maintenance Features
- Regular Charging: To maintain battery capacity and prevent damage, the work light should be charged immediately after purchase, after each use, and at least every 6 months. Leaving the battery in a discharged state can lead to permanent battery damage.
- Cleaning: The device should be unplugged and disconnected before maintenance. A dry cloth can be used to wipe any dirt or oil from the charging cable and case.
- Component Inspection: Users should ensure that all components are in place and in good working condition.
- No User-Serviceable Parts: The unit does not require opening for servicing, as there are no user-serviceable parts. Any required servicing or repair should be performed by qualified service personnel to prevent risks such as fire.
- Proper Storage: The work light should be stored indoors in a cool, dry place. The ideal storage temperature is 70°F (21°C). Extreme temperatures, especially warm environments, can accelerate self-discharge and potentially damage the battery if left in a discharged state.
Safety Precautions
The manual emphasizes several critical safety precautions:
- Do NOT turn on or handle the work light while charging.
- Avoid direct eye exposure to the light.
- Keep children away from the work light.
- Do NOT operate if damaged.
- Do NOT disassemble the work light.
- Do NOT crush, puncture, short external contacts, or dispose of in fire or water.
- Do NOT expose to temperatures above 140°F (60°C).
- Proper disposal of the lithium-ion battery is required by local regulations.
- In case of electrolyte contact with skin or eyes, wash thoroughly with soap and water or rinse with cool water and seek medical attention, respectively.
- For lithium-ion battery fires, use appropriate extinguishing agents (water, foam, Halon, CO₂, ABC dry chemical, powdered graphite, copper powder, or soda) and cool the product with water or nonalcoholic liquids after the fire is extinguished. Do NOT touch a hot or burning product.
- The product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
The product should not be disposed of with household waste. It should be recycled responsibly through return and collection systems or by contacting the retailer where it was purchased, to prevent environmental harm and promote sustainable reuse of materials.
Need help?
General
To Next Page
