EasyManua.ls Logo

Schumacher SL26-GU User Manual

Schumacher SL26-GU
50 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LITHIUM-ION TECHNOLOGY
LED CORDLESS
WORK LIGHT
LITHIUM ION 360°
ITEM: 140001GU/BU/RU
SL26-GU
SL26-BU
SL26-RU
DA
DE
EN
ES
FR
IT
NL
SV
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
IMPORTANT : LED arrays are designed to allow individual LEDS to cease functioning
without causing the entire array to fail. The failure could be as a result of shock or
impact. Shock or impact will invalidate warranty.
DISTRIBUTED BY: SCHUMACHER EUROPE
Z.I - Rue de La Baronnerie 3 B-4920 Harzé - Belgium
info@ceteor.com - www.ceteor.com - Tel :+32.4.388.20.17
Question and Answer IconNeed help?

Do you have a question about the Schumacher SL26-GU and is the answer not in the manual?

Schumacher SL26-GU Specifications

General IconGeneral
Power SourceRechargeable Battery
Battery TypeLithium-Ion
Charging Time4-5 hours
Warranty1 year
TypeWork Light

Summary

Important Safety Instructions

Charging and Battery Safety

Charge work light immediately after purchase, each use, and every 6 months. Do not leave battery in a discharged state.

Operational and Handling Safety

Do not turn on while charging, handle while charging, look directly into light, use if damaged, or allow children to use.

Charger and Electrical Safety

Use undamaged chargers, pull by plug not cord, and do not expose charger to water or damp conditions.

Personal Safety Precautions

Handling, Repair, and Fire Safety

Do not disassemble; seek qualified service. Avoid crushing/puncturing battery. Use appropriate extinguishers for battery fires.

Chemical Contact Safety

Wash skin with soap/water or eyes with cool water if electrolyte contacts.

Disposal and Temperature Safety

Dispose of batteries per local regulations. Avoid temperatures above 140°F (60°C).

Setup Instructions

Cable Preparation

Remove any cord wraps and uncoil the cable between the charger and the worklight.

Features

Charging Instructions

Charging Procedure and Indicators

Connect cable, plug into outlet. Red LED indicates charging, green LED indicates full charge.

Charging Frequency

Recharge the work light after use and at least every 6 months to maintain battery capacity.

Operating Instructions

Mounting and Positioning

Hang using hooks or use magnets for positioning. Direct lens away from eyes before turning on.

Light Modes

Cycle through 1W end LED, high-power SMD LEDs, and low-power SMD LEDs, then turn off.

Maintenance Instructions

Cleaning and Inspection

Use a dry cloth to wipe dirt/oil from chargers, cords, and case. Ensure components are in good working condition.

Servicing

Servicing does not require opening the unit; any servicing should be performed by qualified personnel.

Storage Instructions

Storage Conditions and Battery Care

Store in a cool, dry place. Charge battery after purchase, use, and every 6 months to prevent damage.

Troubleshooting

Work Light Not Operating

If the work light does not operate, the possible cause is an uncharged battery. Recharge to full charge.

Specifications

Battery and Charger Details

Battery type: Lithium Ion 3.7V - 1500mAh. Charger input: 220/240V AC. Charger output: 5V DC.

Limited Warranty

Warranty Coverage and Limitations

Two-year warranty against defective material/workmanship. Not transferable. Void if misused or modified.

EC Declaration of Conformity

Product Description and Compliance

Rechargeable 360° inspection lamps, 2W COB+1W. Complies with Low Voltage, EMC, WEEE, and RoHS Directives.

Related product manuals