How to fix Schumacher SSC-1500A not charging?
If the battery is connected and the Schumacher Battery Charger is on but not charging, the charger may not be in charging mode. Press the BATTERY SIZE button for the battery that is connected to the charger.
What to do if indicator lights are erratic on Schumacher SSC-1500A?
Erratic indicator lights on your Schumacher Battery Charger may occur if a button was pressed when the charger was plugged in. Ensure nothing is touching the control panel, then unplug the unit and plug it in again to reset it.
What does "bad bat" mean on Schumacher SSC-1500A Battery Charger?
The "bad bat" message on your Schumacher Battery Charger indicates the charger is in abort mode, possibly due to a bad battery or the battery not reaching full charge within 24 hours. This can happen with a very large battery or battery bank. Reset the charger by unplugging it, then select the desired charge rate and battery type again.
What to do if Schumacher SSC-1500A stays at a certain percentage?
If the battery percentage on your Schumacher Battery Charger stays at a certain level (e.g., less than 65%) while charging, do not unplug the charger or change the settings. Be patient and allow the charger to finish. This is normal.
Why is the display still on after unplugging Schumacher Battery Charger?
If the display on your Schumacher Battery Charger remains on after being unplugged, the battery is supplying power to the display. Disconnect the battery or press the BATTERY SIZE or BATTERY TYPE switch.
What to do if indicator lights are lit erratically on Schumacher SSC-1500A Battery Charger?
If the indicator lights on your Schumacher Battery Charger are lit erratically, and the pattern isn't explained in the manual, a button may have been pressed when the charger was plugged in. Ensure nothing is touching the control panel, then unplug the unit and plug it in again.
Why is the current lower than selected on my Schumacher SSC-1500A Battery Charger?
A lower current than selected on your Schumacher Battery Charger can happen for two reasons. First, the charger may have reached the maximum voltage and is reducing the current. Second, the charger might have detected an over-temperature condition and reduced the current to cool down. This is normal. Ensure the side ventilation holes are not blocked and move the charger out of direct sunlight into the shade.
Why does Schumacher Battery Charger jump to 100% when unplugged?
If the percentage increases or jumps to 100% when the settings are changed or the Schumacher Battery Charger is unplugged, it means the battery voltage is still high from a partial charge. Wait for the voltage to settle before resuming the charge. Try charging at a lower rate or turn on the lights to remove the surface charge.
Why is my Schumacher SSC-1500A Battery Charger clicking?
The clicking sound from your Schumacher Battery Charger is normal. The charger has a relay that turns the current on and off to the battery.
Why is my Schumacher SSC-1500A making a clicking sound?
This is normal. The Schumacher Battery Charger has a relay that turns the current on and off to the battery.
General| Brand | Schumacher |
|---|---|
| Model | SSC-1500A |
| Category | Battery Charger |
| Language | English |
Essential safety guidelines for operating the battery charger and handling batteries, including explosion risks.
Guidelines for personal safety, protective gear, and avoiding hazards when working with batteries.
Procedures for preparing the battery and charging area before connecting the charger.
Recommended locations for the charger to ensure safe operation and prevent damage.
Precautions and steps for connecting the charger's DC output clips to the battery.
Instructions for connecting the charger to batteries, both in-vehicle and externally.
Information on assembly and an overview of the charger's controls and settings.
Explanation of the control panel indicators, modes, and display functions.
Detailed instructions on how to operate the charger, including charging modes and completion.
Guide on how to use the charger's integrated battery testing functionality.
Factors influencing battery charging duration and how to estimate it.
Instructions for maintaining the charger after use and proper storage procedures.
Solutions for common problems encountered while operating the battery charger.
Information regarding the limited warranty coverage, terms, and activation.
To Next Page