Instruction manual MICROCLEAN - Denture cleaning unit
10 General hazard notes
10.1 Danger zone
The danger zone is considered to be the area within 1 m of the unit as this is the area
required by the staff for operating it.
This unit may not be protected if it is not used as described in the operating
instructions.
Caution!
Please ensure that:
• you wear gloves when using the polishing liquid to prevent it contacting the skin.
• no equipment or objects are placed in close proximity to this unit which could be
damaged or affected by the magnetic field.
• the lid of the polishing vessel remains closed while the unit is running.
10.2 Operating and servicing staff
Are responsible for transporting, installing, operating and cleaning the unit as well as for
eliminating malfunctioning.
1. This unit must only be operated by properly trained, authorized staff
2. It must be decided who is responsible for operating the unit and adhered to strictly to
rule out uncertainty regarding the safety aspects.
3. The methods for switching off the unit described in the operating instructions must be
strictly adhered to for all procedures (running and cleaning the unit,fitting spare parts
and accessories).
4. The cleaning procedures and those for fitting spare parts and accessories are
described in these instructions so as to be understood by anyone trained in:
• Electrical engineering/Electronics
• Mechanics/Cleaning
The necessary tools and test equipment must be available to them.
Schütz Dental GmbH page: 13/15
To Next Page
Loading...