Instruction manual MICROCLEAN - Denture cleaning unit
1 Technical data
Product data
Unit for use with all dental alloys, titanium, acrylics and ceramics.
Dimensions and weights
Width: 185 mm
Height: 195 mm
Depth: 175 mm
Weight: 7 kg
Electrical power supply values
Power supply: 230 V~ (or 110 V~, 2 Amps for e.g.USA)
Wattage: 200 W
Revolutions: 1450 r.p.m.
Phase number: 1 phase-N+PE
Mid-point conductor: rating N~
Earthed conductor: separate earthed conductor (PE-green/yellow)
Class of protection: I
System of protection: covered
Frequency: 50/60 Hz
General data
Ambient temperature range: 5 - 50°C
Air humidity: up to 65%
Noise level: < 65 dB (A)
2 Brief description (correct use)
The Microclean cleaning unit was developed for cleaning and compacting the surfaces of
metals and acrylics.
This unit was designed to create a magnetic field which reverses its polarity every two
minutes when running. The magnetic field oscillates and rotates the polishing pins. The
impact energy of the pins compacts and cleans the surface of the object and the special
cleaning fluid enhances the effect. Please refer to section 5 „Operation“ for further details
on running this unit.
Schütz Dental GmbH page: 4/15
To Next Page
Loading...