SCHÜTZ MICROCLEAN - Page 7

Instruction manual MICROCLEAN - Denture cleaning unit
Disposal!
Look at chapter 9, page 12.
The following table shows the amounts and cleaning periods.
The table assumes that 150 g of pins and 150 ml of water are used.
MICROCLEAN table
cleaning fluid - orange (universal),
500 ml, order no.: 678855, for following applications:
- Removing oxides from chrome cobalt, titanium and non-precious metals after
sandblasting them to remove the investment material.
- Removing oxides from titanium and non-precious metals after firing porcelain.
- Removing cement from bridgework.
- Removing plaster from acrylic.
Cleaning in the large vessel, order no.: 678820
The amounts are always 150 g pins and 150 ml water
Time
Minutes
Pins
Description
Amount
Fluid
Object/Application Outcome
45 - 60 short/long 70 ml Titanium,CrCo frameworks Matte, silvery sheen
20 - 40 long 70 ml Removing plaster from
acrylic
Removes up to 98%
30 - 45 short/long 70 ml Removing cement from
crowns
Cement is released. Soft
material must be scratched out
or rinsed out with water if
necessary.
Cleaning in the small vessel, order no.: 678864
The amounts are always 15 g pins and 15 ml water
Time
Minutes
Pins
description
Amount
Fluid
Object/Application Outcome
5 - 10 short 5 – 10 ml Titanium,CrCo frameworks Matte, silvery sheen
Schütz Dental GmbH page: 7/15