Program 4: Gate control & low frequency
The channels work with dierent frequencies but with the same pulse width.
Therapy time 30 min (10 to 90 min)
Channel 1: Channel 2:
Frequency: 100 Hz Frequency: 2 Hz
Pulse width: 200 µs Pulse width: 200 µs
Indication: Joint pain
This program combines the eects of
program 1 and 3, in case the analgesic
eect o program 3 is not strong enough.
Program 5: Adaptation
After phase 1 the program changes automatically to phase 2.
Therapy time: 30 min (10 to 90 min)
Phase 1: Phase 2:
Frequency: 100 Hz Frequency: 2 Hz
Pulse width: 150 µs Pulse width: 200 µs
Duration: 10 min Duration: 20 min
Indications: Especially for lower back
pain and sciatic pain syndrome
Program 5 starts with high frequency
stimulation for 10 minutes, to give you
immediate pain relief. After 10 minutes it
automatically changes to a 20 minutes low
frequency stimulation with acupuncture type impulses to release endorphins and to
retain the analgesic eect even beyond stimulation.
The duration of phase 1 and 2 is adjusted in the ratio 3/8 to 5/8.
To Next Page
Loading...
