EasyManua.ls Logo

Schweigen IN10PYB - Selecting Heating Functions

Schweigen IN10PYB
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 13
>>
OPERATION
LIGHT
The sensor operates independently and using it

The light in the oven turns on when:
you touch 
you touch and hold for 3 seconds , when you
use any heating function or a preset programme

 
 
but only for 10 minutes.
Touch 
The
sensor is inactive in standby mode.
COOLING FAN
Cooling fan
operates independently of the
oven functions and the appliance status. Cooling
fan turns on when the oven chamber temperature

temperature.
THERMOSTAT
Thermostat symbol
(next to the oven
temperature) indicates the operating status
of heating elements. When any of the heating
elements operates, the
symbol lights up. The
symbol goes out, if none of the heating elements
operate (e.g. when the oven reaches the desired
temperature or the heating element temperature
drops).
HEATING FUNCTIONS
Touch symbol
to select oven heating functions.
You can use the following controls when you are
in the heat function:
open pre-set programmes menu


settings);
to go back. (If you are on the main to screen
clear settings).
, navigate the menu;
 
If you do nothing for 20 seconds, settings are
cleared and the appliance enters standby mode.


functions are displayed sequentially
or to
navigate.
The default function is Fan assisted heating.

oven chamber outline symbols are display the
select heating functions. Touch or or to


Touch or to adjust temperature and then OK

(If meat probe is detected, the appliance will ask
you to select its temperature. Touch or to
adjust default meat probe temperature of 80°C and

probe is detected.)
Oven light is on switches, and you can use and
sensors. Other functions start after 5 seconds of

THE DURATION symbol is displayed and time
display shows time that has elapsed. You can cancel
a heating programme at any time. By touching:
you can select pre-set programmes.
standby mode.
...................................................................................................................................................................................
...................................................................................................................................................................................