Page 29
*optional
>>
INSTALLATION INSTRUCTIONS
Installation, maintenance and technical
assistance must only be carried out by
qualied technicians. Carefully read the
safety instructions in this manual before
using the oven. Incorrect installation,
maintenance, assistance and use can cause
serious damage/injury to persons or objects.
This product must be installed as instructed
in this manual and in compliance with
Australian/ NZ Standards.
Do not lift or pull the oven from the
door handle and do not force or load weights
when the door is open.
The purchaser is responsible for installation.
Incorrect installation will void the warranty.
Features of the cabinet
• The cabinet area should be dry, aired and
installing the oven, easy access to all control
elements should be ensured.
• The cabinet and its components must be able to
withstand temperatures of up to 90°C without
presenting deformities and/ or surface defects.
• The cabinet must enable the free passage of the
oven connections.
• All household kitchen units must be protected
Australian/ NZ Standards.
Inserting the oven in the cabinet
• Make an opening with the dimensions given in
• Ensure the mains plug is disconnected and then
connect the oven to the mains supply.
• Insert the oven completely into the opening.
• Ensure the oven is safely installed inside the
front face of the cabinet.
To Next Page
Loading...