Normal Procedures
Pilot's Flight Manual
4-10.4 Reissued: 16 Jan 2019
HE LI COP TER IN TE RIOR
1. Set battery, landing light, navigation or
position lights and beacon switches to ON
position; check each light for operation; turn
all switches to OFF position CHECK
WARNING
EX CES SIVE PLAY IN TAIL ROTOR PEDALS
COULD RE SULT IN RE STRIC TION OF TAIL
ROTOR CON TROL.
2. Adjust tail rotor pedals and add shim(s)
between pedals and retaining pins to remove
play. Check security and condition of pins
(Section VII). CHECK
WARNING
CHECK SEAT BELTS FOR SNUG NESS OF FIT
AND EN GAGE MENT OF EX TEN SION MECH A -
NISM EACH TIME BELT IS FAS TENED.
3. Seat belts and shoulder harness CHECK
4. Glove box door closed and latched CHECK
5. Ensure that any items that could interfere with
collective mechanism, including seat belts,
are properly stowed. CHECK
5A. Ensure that all equipment attached to
accessory power plug (if installed) is secure
and does not interfere with flight controls. CHECK
6. Control friction locks RELEASE
7. Controls, freedom of movement CHECK
8. Control frictions ON
9. Altimeter SET
SCHWEIZER
Model 269C-1 Helicopter
FAA Approved
CSP book 2..indd 88 8/4/19 12:53 PM
To Next Page
Loading...
