SCC Fault Isolation Manual 6/03/2020
Page 2 of 11 Rev. 01 9/20/2021
Primary PLC:
This is the brain of the system. This controls all the inputs and outputs of the system.
• This module has 32 inputs and 48 outputs and is IP67 with all connectors connected.
• This MUST be programmed before shipping.
Hopper E-Stops and Water Box E-Stop
Boom 1 Telescope Disable (Opt)
Only if previously equipped with Ram Change
Puts the system into Maintenance Mode
Ram Change Forward (Option)
Oil Cooler comes on at 55°c.
Tells the system to listen to the Radio Remote
To Next Page
Loading...
Need help?
General