Schwinn 570U User Manual (English)

Questions and Answers:

J
Jacob SampsonAug 20, 2025
How to fix a Schwinn 570U with no display?
- D
  Derrick ClayAug 20, 2025
  If your Schwinn Exercise Bike's display isn't working, ensure the unit is plugged into a functioning wall outlet. Check that the connection is secure and undamaged, replacing the adapter or connection if necessary. Inspect the cable for any crimped or cut wires, and replace the cable if damaged. Make sure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. Finally, inspect the console display for cracks or damage; replace the console if you find any.
S
Sara NewmanAug 21, 2025
How to sync Schwinn 570U Exercise Bike with Bluetooth?
- T
  Taylor MorrisAug 22, 2025
  To sync workout results from your Schwinn Exercise Bike with a Bluetooth® enabled device, the machine must be in Idle Mode. Push the PAUSE(END) button until the Power Up Mode screen is displayed. Note that only workouts longer than 1 minute are saved and posted by the Console. Unplug the unit from the electrical outlet for a few minutes, then reconnect it. Ensure that Bluetooth® is enabled on your device and that your device is compatible with the Fitness App.
A
andreacolemanAug 25, 2025
Why does the resistance not change on my Schwinn 570U?
- J
  Jeffrey GrayAug 25, 2025
  If the resistance on your Schwinn Exercise Bike isn't changing, start by replacing the batteries. Next, check the console for any visual signs of damage, and replace it if needed. Inspect the cable wires for crimps or cuts, replacing the cable if damaged. Ensure the cable is securely connected and properly oriented, reseating all connections. Lastly, if the magnets move, adjust them until they are within the proper range; if they aren't functioning correctly, replace the Servo Motor.
H
Heather DiazAug 26, 2025
How to level a Schwinn 570U?
- C
  Courtney MeyerAug 26, 2025
  If your Schwinn Exercise Bike rocks or doesn't sit level, adjust the levelers until the bike is level. If the surface is extremely uneven, you may need to move the bike to a more level area.
T
Thomas ReidAug 28, 2025
Why are the pedals loose on my Schwinn 570U?
- W
  Wayne SmithAug 28, 2025
  If the pedals on your Schwinn Exercise Bike feel loose or make it difficult to pedal, ensure the pedal is tightened securely to the crank and that the connection is not cross-threaded. Also, verify the crank is tightened securely to the axle, ensuring the cranks are connected at 180 degrees from each other.
D
Diana MorganAug 30, 2025
How to stop seat post movement on Schwinn 570U?
- L
  lopezmelissaAug 30, 2025
  If you're experiencing seat post movement on your Schwinn Exercise Bike, make sure the adjustment pin is locked into one of the seat post adjustment holes and that the knob is securely tightened.
C
Cindy AriasSep 1, 2025
How to fix clicking sound when pedaling Schwinn 570U Exercise Bike?
- E
  Elizabeth OrtizSep 1, 2025
  If you hear a clicking sound when pedaling your Schwinn Exercise Bike, remove the pedals, ensure there is no debris on the threads, and then reinstall them.
J
Jessica HollandSep 2, 2025
Why does my Schwinn Exercise Bike console shut off during workout?
- I
  iwagnerSep 2, 2025
  If your Schwinn Exercise Bike console shuts off or enters sleep mode during use, ensure the unit is plugged into a functioning wall outlet and the connection is secure and undamaged; replace the adapter or connection if damaged. Check the cable for cut or crimped wires, replacing it if necessary, and ensure it's securely connected and oriented properly. Unplug the unit from the electrical outlet for 3 minutes, then reconnect it. Also, check that the magnets are in place on the pulley and that the speed sensor is aligned with the magnet and connected to the data cable; realign or replace the sensor if needed.
J
Joe FoleySep 5, 2025
What to do if Schwinn Exercise Bike displays 'Please Pedal'?
- M
  Michael BauerSep 5, 2025
  If your Schwinn Exercise Bike console displays a “Please Pedal” error or there's no speed/RPM reading, check that all wires in the cable are intact, replacing it if any are cut or crimped. Ensure the cable is securely connected and oriented properly. Verify that the magnets are in place on the pulley. Also, check that the speed sensor is aligned with the magnet and connected to the data cable, realigning it if necessary, and replace the sensor if damaged.
S
Sara MillsSep 7, 2025
Why is Telemetric HR not displayed on my Schwinn Exercise Bike?
- L
  lopezellenSep 7, 2025
  If your Schwinn Exercise Bike operates but the telemetric heart rate (HR) isn't displayed, ensure the strap is POLAR® compatible and uncoded. Make sure the strap is directly against your skin and the contact area is wet. If the strap has replaceable batteries, install new ones. Also, select the EDIT USER PROFILE option for your user profile. If eliminating interference doesn't resolve the issue, replace the strap. If the HR still doesn't function, replace the console.

Schwinn 570U Specifications

General

Resistance Levels	25
Workout Programs	29
Bluetooth Connectivity	Yes
User Profiles	4
Maximum User Weight	300 lbs
Transport Wheels	Yes
Display	LCD
Heart Rate Monitoring	Grip + Telemetry Enabled
Seat Adjustment	Yes
Handlebar Adjustment	Yes
Warranty	10 year frame, 2 year mechanical, 1 year electrical, 90 day labor
Type	Upright