37
Note: Your machine may not match the image. For reference only.
1. Move the Seat to the front of the Seat Rail.
2. Pull the Seat Rail Locking Pin (M) to release and raise the Seat Rail
Assembly to the folded position. Make sure that you have a secure
grip when raising the Seat Rail Assembly.
Stay clear of the movement path of the Seat Rail
Assembly.
3. Release the Seat Rail Locking Pin (M) to engage the support tube.
You will hear an audible clicking noise. Be sure that the Seat Rail
Locking Pin is fully engaged. If it is not fully engaged, injury to the
user can occur.
NOTICE: The Stabilizer Foot assembly contains grease which can stain.
Itisadvisabletoprotecttheoororcarpet.
4. Fully loosen the Adjustment Handle (A) and remove. Be aware that the
internal spring will recoil suddenly when the Adjustment Handle is fully
loosened.
5. Grasp one of the curved Support Plates (S) and the Lift Handle
(L). Carefully tilt the machine in order to remove the base (B) of the
Stabilizer Foot.
NOTICE: Do not crimp the cables. This step may require two people.
M
B
A
S
L
To Next Page
Loading...
