SYMPTOMS POSSIBLE DIAGNOSIS POSSIBLE DIAGNOSIS
Mains switch fails to
switch on convection
fan when switched on
- Faulty power supply
- Faulty fuse
- Defective plug
- Fan faulty
- In all instances
we suggest you
contact a service
technician
The “Control” pilot
light fails to light up
- The pilot light may be faulty
or there may be a problem
in the regulation circuit.
- The safety thermostat may
be set below the control set
temperature.
Control pilot light on but
no heating
- Element faulty
- Contact a service
technician.
- Contact a service
technician
- Turn safety thermostat
selector knob slightly
clockwise until control
circuit is activated.
TROUBLE-SHOOTING GUIDE
To Next Page
Loading...