Upper Crank Assembly (PRO1000 Sport Fixed)
Tools Required
•• 5/32" (4mm) Allen Hex Torque Wrench Set For 480 in-lbs
• 5/16" (8mm) Allen Hex Bit
Components and Hardware
Seat Screw, 5/8-11 x 1/2"
Washer, Flat, .25ID x
.835OD
Screw, 1/4-20 x 1/2",
BSCS
Left Upper CrankRight Upper Crank
Qty. 2Qty. 4Qty. 4Qty. 1Qty. 1
Attention: Failure to install the washers and screws may cause injury, if crank is facing downward and adjustments are made.
Page 13 of 24
To Next Page
Loading...
