Hybex® Microsample Incubator — USER MANUAL
Version 1.9, Oct 2019 5 (408) 733-7337, techserv@scigene.com
E. Cautions
Failure to comply with the following cautionary statement affixed to the product may lead
to possible personal injury.
Omission de se conformer à la mise en garde suivante apposée sur le produit peut entraîner
des blessures possibles.
This symbol located both on and in front of the lid indicates the potential presence
of a Hot Surface. Use care when working in this area to avoid being burned.
Ce symbole situé sur et devant le couvercle indique la présence possible d'une
Surface chaude. Faire preuve de diligence lorsqu'il travaille dans ce domaine
pour éviter d'être brûlé.
F. Compliance
1. European Conformity (CE)
This symbol indicates the instrument is in compliance with all applicable
European Union Electromagnetic Compatibility and Low Voltage Directives.
2. Waste Electrical & Electronic Equipment Directive (WEEE)
WEEE is a European Community directive that became European Law in
February 2003. The crossed out wheelie bin symbol on a product or its
packaging indicates that it must NOT be disposed of with standard waste at the
end of its lifetime. Instead, it is your responsibility to return it to a designated
collection point for electronic equipment recycling. Contact your local SciGene
distributor for information on drop off locations.
3. Restriction of Hazardous Substances (RoHS)
The RoHS directive was adopted in February 2003 by the European Union. It
restricts (with exceptions) the use of six hazardous materials (including lead
and mercury) in the manufacture of various types of electronic equipment. All
SciGene instruments carrying the CE mark are also RoHS compliant.
4. Laboratory Equipment Standards
This symbol indicates the instrument meets Laboratory Equipment standards
UL 61010-1:2012 R04.16 and CAN/CSA-C22.2 61010-1:2012 + GI1 + GI2 as
certified by TÜV Rheinland of North America, Inc.
5. Electromagnetic Compatibility (EMC)
The Hybex System is a Class A digital device under FCC Title 47 Part 15B and
designated as Class A electrical equipment for measurement, control, and
laboratory use (EN61326).
Note regarding Canadian EMC compliance: Le present appareil numerique
n’emet pas de bruits radioelectrique depassant les limites applicables aux
appareils numeriques de class A prescrites dans le reglement sur le brouillage
radioelectrique edicte par le Ministere des Communications du Canada.
RoHS