16
If the indicator keeps ashing, that means there is an issue with the charger
or the product (battery, connector...).
If the problem persists, please contact an authorised service centre for
repairs.
For a brake fault
For an engine fault
For a defect of the handle
For a lack of control
If the device is not running smoothly:
This can happen when you overload the engine while the battery is not fully
charged. In such a case, it is necessary to press the accelerator more slowly
and especially to check that the battery is fully charged.
Can the battery be replaced?
Yes, but the scooter is not designed for the battery to be replaced by the
user.
Error codes and meanings:
- E1 : Engine failure
- E2 : Controller failure
- E3 : Electronic brake failure
- E4 : Accelerator failure
- E5 : Battery under voltage. Try a long charge. If the problem still exists,
consult your dealer.
- E6 : Communication failure between the display and the controller
- E7 : Overvoltage protection
- E8 : Electrical power failure. Consult your dealer.
To Next Page
Loading...
