09
4. USER GUIDE
4.1. CHARGING AND BATTERY INDICATOR
Charge the battery before rst use. To do this, use the charger provided to
charge the battery.
1. The charging port of this scooter (5) is located on the handlebars.
Remove the cap and connect the low voltage charging cable to the
charging port (5) before connecting the other end to a power source.
2. The charger indicator light will turn red while charging.
3. The charger indicator light will turn green once the battery is fully
charged.
4. Disconnect the end connected to the device and replace the cap.
Check the charge level of the battery before use with the battery level
indicator (2).
Notice:
We recommend you fully recharge the battery after each use and at least
once a month.
To Next Page
Loading...
