Scope Communications UK Ltd
44) Over The Air Commands
The following OTA commands are executed by entering the command codes as shown
below. In order for the code to work properly you must have the following set in the
pager.
OTA Power OFF – [0091][0]
1. Identify a Cap Code Beep Type as Numeric. A, B, C or D.
2. Send N0100008A[0091][0] . The pager will turn off.
OTA MSG DEL – [0092[0]
1. Send N0100008A[0092][0] – All Memory will be cleared.
To Previous Page
Loading...
