Scope Communications UK Ltd
Ref: 40A7PROGMANUAL Page 4 of 11 Issue 1
FUNCTION & FEATURES
Page 1 Address/Folder Menu
1) [Address]
6 addresses, selectable as Private or Public. For operation with
Scope paging systems, addresses must be set as Private.
Each address can be Enabled/Disabled using the Tick box to the left
of the Address. Each tone type for each address is independently
selectable as Numeric, Alpha, Tone or Disabled. The Urgent Call
function (see below) is selectable for all 6 addresses on any tone
type (Tick box labelled “Uch”).
All cap codes are frame independent.
Capcodes must be within the
following ranges: 8-2007663; 2007672-2045055;
2045064-2097143.
2) [Message Folder]
Where addresses are set to Public (for wide area paging service
only), up to 24 separate folders can be enabled.
Page 2 Feature On/Off Menu
3) [Num. Char Set]
“0..9AU -][“ is the default setting for English use
“0..9ABCDE” is for special character use only
4) [Date/Time format]
D/M/Y 12h (UK Style, 12 hour clock)
M/D/Y 12h (USA Style, 12 hour clock)
D/M/Y 24h (UK Style, 24 hour clock)
M/D/Y 24h (USA Style, 24 hour clock)
To Next Page
Loading...
