To Next PageTo Next Page
Need help?Do you have a question about the SCORPION ScorpionTrack 5 and is the answer not in the manual?
Details the system's recognition and certification by Thatcham Research.
Emphasizes completing online registration for product, customer, and vehicle before installation.
Provides contact information and operating hours for technical support.
Covers charging procedures, battery life, and recommended placement for driver cards.
Explains how RF shielding and placement affect driver card recognition.
Guidance on optimal placement for the unit and GPS antenna to ensure signal quality.
Details connections for permanent power supply (+30) and ignition supply (+15).
Explains permanent ground connection and the crank inhibit circuit wiring.
Procedures to check for and resolve radio frequency interference issues.
Describes unit commissioning steps, LED status indicators, and expected text notifications.
Explains the meaning of various LED light patterns for GPS and Cellular signals.
Provides examples of text messages received during normal and non-standard installation processes.
Details text notifications for low driver card battery and card recognition issues.
Instructions on how to program additional or replacement driver cards via Tracking Support.
Procedure for reporting and handling lost or damaged driver cards.
Steps to take when the unit shows no LED activity, including contacting support.
Checks for ignition, GPS signal, and LED flash counts for troubleshooting.
General