Scosche StuckUp - Mount Adjustment and Device Handling

Press the side & bottom support
release buttons (A & B) to fully
open the Universal Mount.
Place the device in the mount and
manually press the side supports
inward to secure the device (C)
Note: The bottom support may also be
adjusted manually to raise the devi ce in
the mount, if needed .
Press the side support release
button to remove the device .
Loosen the ball-joint collar on the
Dash Mount (D) to adjust mount
angle or rotate mount (E) ,
Note: Vent mount may be rotated only .
SECTION D
(EN)
8l
'~
0
7