Scotsman ACM 85 - AC 125 Model Specifications

SPECIFICATIONS
ELECTRONIC CUBER MODEL AC 125
Important operating requirements:
MIN MAX
Air temperature 10°C (50°F) 40°C (100°¯F)
Water temperature 5°C (40°F) 40°C (100°F)
Water pressure 1 bar (14 psi) 5 bar (70 psi)
Electr. voltage
variations from
voltage rating
specified on
nameplate -10% +10%
ice making capacity
NOTE. With the unit in “built-in” conditions, the ice production is gradually reduced in respect to the
levels shown in the graf, up to a maximum of 10% at room temperatures higher than 32 ° C.
The daily ice-making capacity is directly related to the condenser air inlet temperature, water
temperature and age of the machine.
To keep your SCOTSMAN CUBER at peak performance levels, periodic maintenance checks
must be carried out as indicated on page 38 of this manual.
Production charts shown indicate the production of ACM models; ice production of ACL and
ACS models is 10% lower.
Page 04
75
70
65
60
55
50
45
Kg.
32 °C27 21 15 10
AIR COOLED MODELS
WATER TEMPERATURE
AMBIENT TEMPERATURE
ICE PRODUCED PER 24 HRS.
°C
10
21
32
38
75
70
65
60
55
50
45
Kg.
°C
WATER COOLED MODELS
WATER TEMPERATURE
AMBIENT TEMPERATURE
ICE PRODUCED PER 24 HRS.
°C
32
38
10 21
32 27 21 15 10