To Next PageTo Next Page
Need help?Do you have a question about the Scotsman DXN Series and is the answer not in the manual?
Safety guidelines for handling flammable R290 refrigerant and ensuring a non-smoking area.
Identifies and describes the main components of the DXN dispenser shown in the image.
Covers general safety rules, handling precautions, and requirements for authorized personnel.
Outlines the acceptable ambient and water conditions for machine operation.
Specifies where and how the DXN series dispensers should be installed for optimal operation.
Details the necessary clearance and environmental conditions for the dispenser's location.
Explains how to connect the water supply, emphasizing standards and regulations.
Describes how to connect the water drain tubing and its required slope.
Covers requirements for connecting the machine to the power supply and safety switches.
A list of essential checks to perform before operating the dispenser.
Step-by-step guide for daily cleaning of external panels and dispensing spouts.
Instructions for cleaning and sanitizing the ice bin area, including required tools.
Explains the 'CLE' indicator and the need for professional water circuit descaling.
Highlights the importance of annual mechanical checks by a service centre.
Advice on preventing ice contamination and avoiding unit damage during daily use.
Steps to take before contacting service and a table of common alarm codes and solutions.
Describes Manual and Touch-Free versions, dispensing modes, and time settings.
Step-by-step guide for starting the DXN dispenser for the first time.
Explains how faults are signaled and how to check current alarms.
Describes the bin empty indicator and the 'CLE' reminder for water circuit cleaning.
General| Ice Type | Nugget Ice |
|---|---|
| Type | Ice Maker |
| Condenser | Air-Cooled |
| Refrigerant | R404A |
| Voltage | 115V, 60Hz, 1Ph |
