Need help?Do you have a question about the Scotsman N0922 and is the answer not in the manual?
Details air, water, voltage, and conductivity limits for proper operation.
Discusses contamination risks and refers to separate warranty information.
Explains airflow needs and required clearances for optimal performance.
Lists compatible bins, adapters, and dispenser models for nugget ice.
Mentions side air flow kits, filter kits, and other related options.
Step-by-step guide to remove front and side panels for access.
Instructions on how to change the front panel bezel for switch covers.
Guidance on positioning the machine on a bin/adapter and leveling it.
Specifies cold potable water requirements and backflow prevention methods.
Details condensate drain connections, water-cooled discharge, and tubing recommendations.
Instructions for connecting electrical power via junction box and strain relief.
Table detailing voltage, condenser type, ampacity, and fuse size for various models.
Outlines needs for remote condenser fan/coil, liquid/discharge tubing, and pre-charged kits.
Specifies compatible condenser models and warns against mineral oil contamination.
Details maximum rise, drop, and line set length with calculation formulas and examples.
Guides on locating the condenser, roof penetration, and sealing requirements.
Covers secure roof attachment methods and adherence to local building codes.
Instructions for routing pre-charged lines, including hole sizes and electrical supply needs.
Guidance on coiling or cutting excess refrigerant tubing to avoid issues.
Steps for preparing and lubricating couplings before connecting refrigerant lines.
Detailed instructions on tightening couplings, marking turns, and checking for leaks.
Specifies cold potable water requirements and backflow prevention for remote models.
Details condensate drain connections and tubing recommendations for remote models.
A comprehensive list of checks before starting the machine, covering location, power, water, and leveling.
Explains the function of indicator lights and the On/Off buttons for basic operation.
Step-by-step guide to turn on water, power, and initiate the machine.
Lists five types of maintenance and their recommended frequencies.
Detailed steps for mixing and applying scale remover solution.
Steps for sanitizing the water system using approved solutions.
Steps for accessing and inspecting the top bearing for grease condition and wear.
Notes on inspecting the drip pan for water seal leaks and gear reducer lubricant.
Instructions on how to lubricate the bearing using specific grease and needles.
Guide to change the frequency of the de-scale reminder light.
Steps to clean the photo-electric eyes for bin full/empty sensing.
Instructions on cleaning the water sensor probe for water level sensing.
Explains the optional adjustable ice level control and its usage.
Details the advanced features of the Smart-Board, like programmable settings and malfunction recall.
Describes the optional remote on-off control feature and its reset procedure.
Describes normal ice production, heat generation, and noise levels.
Lists common causes for the ice machine to shut itself off automatically.
Explains the meaning of various indicator light patterns and their status.
To Next Page
General
