Need help?Do you have a question about the Scotsman N1322 and is the answer not in the manual?
Specifies air, water temperature, pressure, and voltage limits for operation.
Details water quality needs and potential airborne contamination issues.
Overview of warranty coverage and limitations.
Guidance on selecting a suitable location and ensuring proper airflow for performance.
Information on compatible bins, adapters, and dispenser models.
Details on optional accessories like side air flow kits and filter kits.
Dimensional drawings for specific ice machine models.
Dimensional drawings for larger ice machine models.
Instructions for accessing internal components and changing front panel bezels.
Details on potable water supply, connections, and backflow prevention.
Instructions for condensate drain connections and tubing requirements.
Guidance on connecting electrical power and wiring requirements.
Table detailing voltage, ampacity, and fuse size for various models.
Introduction to remote condenser models and required components.
Defines maximum allowable distances and rise/drop for condenser placement.
Instructions for locating and attaching the remote condenser unit.
Steps for routing refrigerant tubing between the ice machine and condenser.
Detailed procedure for connecting refrigerant lines using self-sealing couplings.
Details on water supply, backflow prevention, and condensate drainage for remote models.
Checklist to ensure all installation steps are completed before operation.
Explanation of control buttons, indicator lights, and basic operation.
Instructions for cleaning air filters for air-cooled and remote models.
Guidance on cleaning air-cooled and remote air-cooled condenser coils.
Step-by-step guide for removing scale from the water system.
Steps for sanitizing the ice machine's water system.
How to inspect the top bearing for lubrication and wear.
Procedure for lubricating or replacing the bearing and its grease.
How to adjust the interval for de-scale and sanitize reminders.
Instructions for cleaning the photo-eye sensors for bin full/empty detection.
Procedure for cleaning the water probe in the reservoir.
Explanation of the adjustable ice level control (KVS).
Details on the Smart-Board for programmable settings and diagnostics.
Information on the optional remote on-off control feature.
Checks and common reasons for machine shutdown before contacting service.
Guide to understanding the meaning of different indicator light patterns.
General| Power Supply | 115V/60Hz/1Ph |
|---|---|
| Condenser | Air-Cooled |
| Refrigerant | R-404A |
| Type | Modular |
| Ice Type | Nugget ice |
To Next Page
