OWNER MANUAL
If the brake system has brake pads, you have to be
aware of the fact that the rim will be worn through the
action of braking.
When riding in wet and muddy terrain for example, the
rim is quickly worm out. SCOTT bikes that are fully
equipped (lights, mudguard, carrier) have a wear-out-
indicator.
Please refer to the enclosed instructions of the manu-
facturer.
Maintenance schedule
Please be aware of the fact that you have to follow the
list of maximum tightening torques for screws at the
end of this chapter.
Please check before every ride:
– all bolts and nuts, especially the quick releases of
the wheels for proper fit and in case they are loose
tighten them according to the maximum tightening
torque.
– stem and handlebar for visible damages and
replace them if necessary. Please make sure that
the bolts are tightened evenly when closing the
front cap, according to the tightening torque
recommended by the producer of the parts.
– Braking systems
– Air pressure of the tires according to the
recommendation of the producer.
– Light systems and bell
– Handlebar grips to be fixed to the handlebar
Rim and wear of the rim Maintenance and Care
– All parts of the rear suspension system including
mounting bolts
– The front suspension fork on perfect function and
play in the bushings.
To Next Page
Loading...
Need help?
General
