Chain maintenance / wear Operation Rapidfire plus system
Regularly check that your chain is clean and well-lubri-
cated. Have your dealer check the chain for wear.
Should you nevertheless want to check it yourself, you
need to purchase the Rohloff Chain Caliber 2 from your
SCOTT Dealer. This caliber will help you to work out
whether your chain is too slack of not.
Caution!
Do not press both right hand change control levers or
both left hand change control levers at the same time.
Damage to the change control may result.
Rear lever Operation
For both lever A and lever B, the lever always returns to
the initial position when it is released after changing.
To change from a small sprocket to a larger
sprocket
To change one gear step, press lever A to position 1; to
change two, three or four gear steps at one time, press
lever A to position 2, 3 or 4 respectively. A maximum of
four step change can be operated in this manner.
To change from a larger sprocket to a smaller
sprocket
When lever B is pulled once and is then released, there
is one step change from a large gear to a smaller gear.
OWNER MANUAL
6-7
Lever (A) starting
position
Lever (B)
To Next Page
Loading...
Need help?
General
