CEN-PAQ
6
4. CHECK APPARATUS
1. Check apparatus to ensure that it is
clean and in good condition.
2. Fully slacken waistbelts, remove
facemask from pouch and slacken head
harness, ready for use.
4.1 FIT FULLY CHARGED
CYLINDER
1. Slide fully charged cylinder into
pouch and secure using buckle
positioned behind cylinder valve i.e.
towards the wearer.
WARNING:
DO NOT use cylinders of different
sizes or specifications.
2. Check O-ring on cylinder connector
to ensure that it is clean and in good
condition.
3. Screw handwheel connector fully
into cylinder valve outlet.
4.2 CHECK DEMAND VALVE
1. Check red bypass knob is in the
'OFF' position and depress black rubber
reset button.
To Next Page
Loading...
Need help?
General
