Page 6 of 17
Safety
1. Precautions have been taken to ensure that machinery is supplied with all necessary safety
guards, covers, and warning labels. However, since this equipment is often part of a larger
plant process, it is the responsibility of the customer to ensure that the machinery is safely
installed in the process.
2. Always disconnect and lockout the power before any physical inspection or work is
performed.
3. Should one of the safety decals become damaged or illegible, contact Scott Equipment
immediately for replacement.
4. Under no circumstances should any attempt be made to override the safety equipment that is
supplied on this mixer. Micro switches should never be tampered with so that the machine will
operate when the covers and grates are open. If the mixer must be loaded with the cover
open, safety grating with a lockout switch must be provided.
5. Under no circumstances should any person attempt to put their hand through the discharge of
the machine. If the agitator is in operation, amputation of a limb will occur.
6. This machine should only be operated by trained personnel. Proper training includes reading
and understanding this manual.
To Next Page