2023 SCALE | ENGLISH 4
|
SCALE
SCALE
GEOMETRY & TECHNICAL DATA CONT.
The rear brake calliper is a post mounted 160mm
without an adapter.
The maximum rotor size is 180mm, except on
a small size frame where it must not exceed
160mm.
If you wish to use two piston brake callipers, you
must check the clearance, as not all two piston
brakes will fit.
Please note that on a small size frame it is
only possible to use a 500 ml water bottle,
with a side entry cage.
Carbon frames will have a unique insert for
the rear axle.
To Next Page
Loading...
