EasyManua.ls Logo

SCOTT XRB300 RC - Rds (Radio Data System) Operations

SCOTT XRB300 RC
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To replace the current frequency with the alternative frequency
Regional Program Operation
Using PTY to Select Program
Press button short to switch AF mode on or off. There are 3 state the AF on the LCD display:
AF switching mode off.
AF switching mode on, and has RDS information.
AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking
time of each AFs depends on the signal strength of current station, from a few minute for strong station to few seconds for
weak station. Every time that new AF is stronger than current station, it switches over to that frequency for very short time.
Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. During
FM mode, when AF is on, manual store, Auto store/preset scan function can only receive and save RDS program.
Press button for 2 seconds to switch on or off region mode.
Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time
period.
When region is on, the current listening program remains unchanged. When region is off, it allows the reception moved to
the regional station.
AF/REG “”
Segment “AF” off:
Segment “AF” on:
Segment “AF” flashing:
AF/REG
segment
Press the button for 2 seconds repeatedly to select the PTY as follows:
PTY MUSIC GROUP PTY SPEECH GROUP GROUP PTY OFF
When the PTY MUSCI GROUP or PTY SPEECH GROUP has been selected, press any one of the preset numbered buttons
repeatedly to search relevant PTY information. And stop searching if the radio detect the PTY relevant information. If the
relevant PTY information is not found, the radio exit the PTY function and return to previous normal mode.
PTY
RDS (Radio Data System) Operations
- Auto store:
AMS
.
Press the button for more than 2 seconds to start auto store. The radio will scan from the lowest frequency, and
automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will start preset
scan to the stored 6 station
GB-15