Service Intervals - 13
SERVICE INTERVALS
Service Intervals
Service Intervals
Please use the following timetables to perform routine
maintenance on your machine. Service procedures
included in this manual but not on this chart are to be
performed on an as needed basis.
Before Each Use
• Check oil level.
After Each Use
• Clean the mower.
First 5 Hour
• Change engine oil. (Break-in)
• Lubricate mower axles.
• Lubricate drive shaft hub bushings.
Every 25 Hours Or Once A Year
• Tighten blade bolt.
• Clean or replace air cleaner paper element.
• Clean and gap spark plug.
• Clean belt and transmission area.
• Change engine oil.
• Lubricate mower axles.
• Lubricate drive shaft hub bushings.
IMPORTANT: Avoid damage! If you operate mower
in extreme heat, dust or other severe conditions,
service more often than shown below.
To Next Page
Loading...
Need help?
General
