Do you have a question about the Scotts Turf Builder EdgeGuard MINI and is the answer not in the manual?
Set application rate on the backside of the spreader.
On/Off control located on the backside of the spreader.
Fill the spreader hopper with your chosen Scotts lawn product.
Turn the orange rate dial to the correct setting for the product.
Walk at a steady pace, squeeze and hold the trigger to apply product.
Sweep stray particles, store leftover product, wash, and dry the spreader.
Apply two header strips, then back and forth in the longest direction.
Apply one header strip around the lawn, then apply back and forth.
Make passes 5 feet from previous for proper overlap and even coverage.