Scout MT-700 Series - Temperature LLS Sensor; Span Button

МТ-700 fleet tracking system 105
Figure 122. «Temperature» LLS sensor
For the “Temperature” sensor the following parameters are available:
Net number – sensor net number in LLS protocol (0 o 255).
Write threshold – threshold for the value change to create a new entry.
Recommended - 1
Filter length – time(s), for averaging the values. Default value - 8
Fuel level sensors SPAN
The terminal and Configurator support the span table saving to ease the SPAN
procedure of the Fuel level sensors. Table is saved in the settings profile and during the data
transition is send to the server.
The SPAN mode includes the procedure in which the petrol tank drains and refuels with
the small fixated portions.
To start the SPAN push the «SPAN» button in the «Fuel level» window (Figure 123).
Figure 123. «Span» button
After pressing the button, the following window is opened: (Figure 124).