Scout Wifi onBoard User Manual

www.scoutantenne.com Page 1/8
To avoid burning and voltage caused traumas, of the personnel working with the device, please follow these safety requirements:
The device is intended for supply from a Limited Power Source (LPS) that power consumption should not exceed
15VA and current rating of over current protective device should not exceed 2A.
The highest transient over voltage in the output (secondary circuit) of used PSU shall not exceed 36V peak.
The device can be used with the Personal Computer (rst safety class) or Notebook (second safety class). Associated
equipment: PSU (power supply unit) (LPS) and personal computer (PC) shall comply with the requirements of
standard EN 60950-1.
Do not mount or service the device during a thunderstorm.
To avoid mechanical damages to the device it is recommended to transport it packed in a damage-proof pack.
To avoid mechanical damage to the device it is recommended to transport it packed in a damageproof pack. When using the
device it should be placed so that its indicating LEDs would be visible as they inform in which working mode the device is in and if
it has any working problems.
Protection against over current, short circuiting and earth faults should be provided as a part of the building installation.
Signal level of the device depends on the environment in which it is working in. In case the device starts working insuciently, please
refer to qualied personnel in order to repair this product. We recommend forwarding it to a repair center or the manufacturer.
There are no exchangeable parts inside the device.
Protection in primary circuits of associated PC and PSU (LPS) against short circuits and earth faults of associated PC
shall be provided as part of the building installation.
Wi onBoard - 4G/LTE dual sim Router + 10 dB WiFi antenna
Code: PF AN NWIFI12
4G onBoard - 4G/LTE dual sim Router + 4 dB 4G/LTE antenna
Code: PF AN NWIFI13
4G onBoard Plus - 4G/LTE dual sim Router + 2x 4 dB 4G/LTE antenna
Code: PF AN NWIFI11
WiFi + 4G onBoard - 4G/LTE dual sim Router + 10 dB WiFi antenna + 4 dB 4G/LTE antenna
Code: PF AN NWIFI08
WiFi + 4G onBoard Plus - 4G/LTE dual sim Router + 10 dB WiFi antenna + 2x 4 dB 4G/LTE antenna
Code: PF AN NWIFI14
Quick start guide
(v2.19)
Thank you for purchasing a Scout product. This guide refers to all the WiFi/4G systems listed above, before installing the router
and the antenna(s) please read carefully all instructions. Customer comments are welcome.

Scout Wifi onBoard Specifications

General

Brand	Scout
Model	Wifi onBoard
Category	Network Router
Language	English

Summary

Safety Information and Precautions

General Safety Warnings

Lists crucial safety precautions for device operation, including power, voltage, thunderstorms, and mechanical damage.

Device Overview and Connections

Router Front and Back Views

Illustrates and labels the front and back panel components, including ports, LEDs, and connectors.

Power Socket Pinout

Details the wiring and pin configuration for the router's power socket.

Hardware Installation Steps

Provides step-by-step instructions for the physical installation of the router and SIM card.

Antenna Connection Guide

Model-Specific Antenna Connections

Details antenna hookups for WiFi onBoard, 4G onBoard, and 4G onBoard Plus models.

Additional Antenna Information

Additional Model Antenna Connections

Details antenna hookups for WiFi + 4G and WiFi + 4G Plus models.

Antenna Reference

Provides visual references and specifications for different types of antennas used with the router.

Device Login and WAN Configuration

Login to Device Web Interface

Guides users on how to access and log into the router's web interface for configuration.

WAN Connection Setup

Explains how to configure the router's WAN (Wide Area Network) connection settings.

Connecting to External WiFi Networks

Scanning for Available Networks

Details the process of scanning for and connecting to external WiFi access points.

Advanced Router Management

Complete User Manual Access

Provides the link to the comprehensive user manual for detailed information.

Mobile App for Setup and Monitoring

Guides on using the mobile app for router setup, monitoring, and management.

Remote Management Solution (RMS)

Explains how to enable and utilize the Scout Remote Management System for remote control.

Technical and Safety Information

Technical Specifications

Lists the radio and bundled antenna specifications for the router.

Safety Information and Compliance

Details safety compliance statements and regulations for the device.