Screen JPD-HA120 User Manual

Screen Misura Pressione
Pressure Gauge
User Manual
REF: 970791796
English
CATALOGUE NR: JPD-HA120
English
PRODUCT COMPOSITION
The product is comprised of the host machine and the cuff of Electronic Blood Pressure
Monitor.
INTENDED USE
The Electronic Blood Pressure Monitor is intended to measure the systolic and diastolic
blood pressure as well as the pulse rate of adult person via non-invasive oscillometric
technique at medical facilities or at home
•
SAFETY PRECAUTIONS
QUICK START GUIDE
Avoid smoking, eating, drinking caffeinated drinks or exercising for 30 minutes before
taking measurement.
1. Sit upright in a chair with both feet on the floor.
2. Remove tight fitting clothing from your upper arm along
with any thick clothing.
3. Pull on the end of the cuff until it wraps securely around
your upper arm. Place your arm on a table so that the cuff will
be at the same level as your heart.
4. The cuff will automatically inflate and the measurement will
start, upon pressing the “START/STOP” button.
5. When the measurement is complete, the cuff will
automatically deflate and your systolic and diastolic pressure
values and pulse
rate will be
displayed.
OVERVIEW
Monitor
Features
⚫ Universal Cuff
⚫ 99 Readings * 2 Users
⚫ Average of last 3 readings
⚫ Irregular Heartbeat Detector
⚫ Auto-off Power Saving Feature
⚫ Bluetooth Transmission Function
⚫ Operated by 4 AA batteries (USB 5V optional)
Display
Packing List
No.
Name
Quantity
1
Electronic Blood Pressure Monitor
1
2
Cuff
1
3
Dry Battery (AA)
4
4
User Manual
1
5
Zipped Cattying Bag
1
PREPARATION
2.1 Battery Installation
a）Open the battery cover as shown in the picture.
b）Place 4 AA dry batteries. Pay attention to the
battery electrode indication.
2.2 Battery power indication and
replacement
After the product is turned on, if low power symbol appears on the screen , the
measurement cannot be performed, and the battery must be replaced.
Do not use any expired battery;
If the product is not used for over 3 months, please
take out the batteries.
2.3 USB Power Supply
USB line can be connected for power supply of the product without battery.
2.4 Cuff
The applicable arm circumference range of the cuff is 22-36cm or 22-42cm.
Connection: Insert the air plug of cuff air tube into air jack of the Electronic Blood Pressure
Monitor. Figure shown as above:
Legend, mark and meaning
Warning message
Anti-electric shock degree is Type BF of the application part
When the product life expires and the end users discard the
products, send them to the designated collecting and separating
place for disposal according to the requirements from the local
environmental protection authority.
Consult the instructions for use.
This product complies with the MDD93/42/EEC requirements.
IP21
Degree of protection against the ingress of water.
Information of manufacturer
Date of manufacture
Authorized European Representative

Screen JPD-HA120 Specifications

General

Brand	Screen
Model	JPD-HA120
Category	Blood Pressure Monitor
Language	English

Summary

Product Overview and Intended Use

Product Composition

Lists the components included in the Electronic Blood Pressure Monitor package.

Intended Use

Specifies the device's purpose: measuring systolic, diastolic blood pressure, and pulse rate.

Safety Precautions

General Safety Information

Covers symbols, warning messages, anti-electric shock degree, and disposal guidelines.

Quick Start Guide

Pre-Measurement Preparation

Details steps for preparing the body and environment before taking a measurement.

Measurement Procedure

Step-by-step instructions for performing a blood pressure measurement using the device.

Device Preparation and Setup

Battery and Power Options

Instructions for battery installation, replacement, and USB power supply.

Cuff Usage and Connection

Details on cuff application, size range, and connection to the monitor.

Function Setting Mode

User Mode Selection

Guide on switching between User 1 and User 2 profiles.

Date and Time Setting

Procedure for setting the year, month, date, hour, and minute.

Talking Function and Unit Setting

Configuration for voice output and measurement units (mmHg/kPa).

Correct Mode of Use

Cuff Application

Detailed instructions on how to correctly wear the cuff on the upper arm.

Starting Measurement

Steps to initiate measurement, including cuff inflation and deflation process.

Interpreting Measurement Icons

Explanation of icons like 'heart' for pulse and warnings for body movement or irregular heartbeat.

Memory and Troubleshooting

Using Memory Function

How to access, track, and interpret stored measurement data.

Clearing Stored Data

Instructions for deleting all stored measurement data for both users.

Troubleshooting Common Errors

Identifies common problems, possible causes, and solutions for device errors.

Storage, Maintenance, and Specifications

Storage and Maintenance Guidelines

Recommendations for storing, cleaning, and disinfecting the device.

Device Specifications

Technical details including measurement range, accuracy, and storage capacity.

Electromagnetic Compatibility

Electromagnetic Emission Declaration

Details compliance with CISPR 11 for RF emissions.

Electromagnetic Immunity Declaration

States compliance with IEC 60601 for electromagnetic immunity.

RF Wireless Communications Immunity

Specifies immunity levels for proximity fields from RF wireless communication equipment.

Regulatory and Compliance Statements

FCC Compliance Statements

Information regarding FCC rules, harmful interference, and user modifications.

US Radiation Exposure Statement

Details compliance with FCC radiation exposure limits for uncontrolled environments.