EasyManua.ls Logo

SCS MONITOR - Installation and Usage Cautions

SCS MONITOR
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN ::: 18
If the socket holes are larger than
normal, do not put the plug.
It may cause an electric shock
or a re.
Make sure that dust or foreign
substances are not gathered on
the product.
Make sure to prevent forei-
gn substances from entering
the product. It may cause a
breakdown.
Install the product in a at and
stable place. Otherwise, it may
not function properly.
Pull the plug if the product is not
used for a long time.
If the product generates strange
sound, make sure to pull the
plug immediately and contact
service center.
Do not put a heavy object on
the product. It may cause a
breakdown.
Do not disassemble or give an
impact to the product.
Avoid direct rays of the sun or
heating devices at a time of
installation.
It indicates prohibition.
It indicates disassembly.
It indicates prohibition of contact.
It indicates dos and don’ts.
It indicates that the plug should be
pulled out from the socket.
Caution
An injury or property
losses are expected
Caution
NO
NO NO