SCS MONITOR - Operational Functions; Call Handling and Monitoring

EN ::: 23
INCOMING CALL ANSWEAR
When a visitor presses doorbell, all the indoor monitors in this house will chi-
me simultaneously, the LCD will show “INCOMING CALL”. Press to talk
with the visitor. The monitor will return to standby state if no one answers
after chime time ends. At ringing and answering state, Press button to
unlock the door for the visitor, and the LCD will show “DOOR UNLOCKED”.
If there is another incoming call when talking with Door 1, the LCD will show
“SOMEONE IS VISITING AT DOOR 2”, then press can switch the display
image to Door 2 and talk with another visitor.
Note: At the state of answering or intercom between monitors, long press
button, the microphone will be mute, and the LCD will show “MUTE”, long
press button again the microphone return to normal, and the LCD will
show “PLEASE TALK”.
MONITOR DOORBELLS
At standby status, press button to monitor Doorbell 1, press again,
change the viewing screen to another video channel.
When monitoring Door bell channel, press
can talk with people in front of
the door bell, and press can open the door.
BROADCAST FUNCTION
This function allows you to broadcast information for all monitors in your
house.
At standby state, Long press
button , the display will show BROADCAST
REQUEST, the monitor in other rooms will show BROADCASTING . Now you
can make a broadcast.