Need help?Do you have a question about the SCULPFUN S6 and is the answer not in the manual?
General| Laser Power | 5.5W |
|---|---|
| Machine Power | 30W |
| Engraving Accuracy | 0.01mm |
| Laser Protective Cover | Yes |
| Input Format | NC, BMP, JPG, PNG, DXF |
| Data Transmission Method | USB |
| Laser Type | Diode laser |
| Engraving Speed | 10000mm/min |
| Cooling System | Air cooling |
| Focus Adjustment | Manual |
| Connection | USB |
| Focusing Method | Fixed focus |
| Material Compatibility | Wood, cardboard, plastic |
| Operating Software | LaserGRBL, LightBurn |
| Power Supply | 12V 5A |
| Machine Material | Aluminum |
| Engraving Area | 410mm x 420mm |
| Laser Wavelength | 455nm |
Identifies and labels the main components of the laser engraver assembly.
Guides the assembly of the back, left, and right frame beams using specific screws.
Details the assembly of the X beam set and front beam onto the main frame.
Provides instructions for correctly installing the drive belt onto the engraver.
Explains the process of installing T-nuts for belt tensioning and securing.
Covers the installation of the laser module and connection of the data cable.
Explains the fixed focal length and its relation to the aluminum alloy shell.
Step-by-step instructions for quickly and accurately focusing the laser module.
To Next Page
