SF-A9 Machine User Manual
7、Flame alarm instructions
(1) There is a built-in flame sensor + temperature
sensor under the laser.
(2) After detecting the flame, the machine will
automatically calculate the safest distance. After
the laser head moves to a safe position, it will
stop working and alarm to avoid danger.
(3) The alarm sound will not stop automatically
and the machine needs to be restarted manually.
(1) The machine has a built-in tilt sensor
(2) When the table on which the machine is placed tilts and the
angle exceeds 15°, it will stop working and alarm to avoid danger.
(3) The alarm sound will not stop automatically and the machine
needs to be restarted manually.
9、If the above steps cannot be solved by yourself, or you
have other questions.
You can send the fault video, machine and other information to SculpFun
official after-sales email(support@sculpfun.com)，After-sales personnel
will handle it for you
8、Tilt alarm description
22
EN
To Next Page
Loading...