SDCEM MR41E - Page 15

PAGE
13
NTI010hA
CHARACTERISTICS
Operating mechanism
type MR41E
PADLOCKING OF THE CASING DOOR
Door locked
Door unlocked
HV / LV LOCKING (OPTION)
This device lets you lock the position selector in the ‘out of operation’ mode, with a lock of the RONIS EL11AP type (bolt
extended, key free), only when the operating mechanism is in the ‘open’ position.
To lock the position selector:
Place the electrical operating mechanism in the ‘open’ position, then place the
position selector in ‘Out of Operation’.
1
Insert the key and release the
keylock.
1
The position selector is locked in the ‘Out of Operation’ position.
To unlock the position selector:
Lock the keylock and remove the key
2
Place the position
selector in the ‘In
operation’ or ‘Manual’
position.
2
The key remains captive in the keylock. The position selector is free.